Shipping lithium batteries

For anyone travelling with their BlueROV2, you will need to plan ahead and send your lithium-ion batteries in advance to your final destination.

Within Australia, Li-ion and LiPo batteries are considered Dangerous Goods and will almost always travel by ground. For details on how to ship, see LiPo battery guidelines at Australia Post and their latest Dangerous Goods Packing Guide. You will most likely need to partially discharge the batteries before they are shipped in order to meet AusPost’s limit of 100 Watt-hour per battery, in addition to completing a Dangerous Goods declaration.

For international travel, you will be subject to IATA – Lithium Battery Guidelines and your chosen logistics company’s rules. Most international logistics companies have lithium battery guidelines published on their websites. For example, FedEx has a Lithium Battery Wizard to help you navigate their requirements.

Most shipping regulations are based on the IATA Dangerous Goods Regulations (DGR) for lithium batteries which was most recently updated in 2017. The IATA website also offers an updated Guidance Document for help on compliance with 2017 definitions, classification, exceptions, and prohibitions.

And don’t forget to pack your charger!

Deep water exploration of Batemans Bay

[cs_content][cs_section parallax=”false” style=”margin: 0px;padding: 45px 0px;”][cs_row inner_container=”true” marginless_columns=”false” style=”margin: 0px auto;padding: 0px;”][cs_column fade=”false” fade_animation=”in” fade_animation_offset=”45px” fade_duration=”750″ type=”1/1″ style=”padding: 0px;”][cs_text]Dave has been diving deeper and deeper into Batemans Bay and found some amazing creatures:[/cs_text][/cs_column][/cs_row][/cs_section][cs_section parallax=”false” style=”margin: 0px;padding: 45px 0px;”][cs_row inner_container=”true” marginless_columns=”false” style=”margin: 0px auto;padding: 0px;”][cs_column fade=”false” fade_animation=”in” fade_animation_offset=”45px” fade_duration=”750″ type=”1/1″ style=”padding: 0px;”][x_video_embed no_container=”false” type=”16:9″][/x_video_embed][/cs_column][/cs_row][/cs_section][/cs_content]

Blue Robotics recovering mooring line in Norway

[cs_content][cs_section parallax=”false” style=”margin: 0px;padding: 45px 0px;”][cs_row inner_container=”true” marginless_columns=”false” style=”margin: 0px auto;padding: 0px;”][cs_column fade=”false” fade_animation=”in” fade_animation_offset=”45px” fade_duration=”750″ type=”1/1″ style=”padding: 0px;”][cs_text]Blue Robotics video of recovering mooring line using the BlueROV2 and Waterlinked GPS (in Norway):[/cs_text][/cs_column][/cs_row][/cs_section][cs_section parallax=”false” style=”margin: 0px;padding: 45px 0px;”][cs_row inner_container=”true” marginless_columns=”false” style=”margin: 0px auto;padding: 0px;”][cs_column fade=”false” fade_animation=”in” fade_animation_offset=”45px” fade_duration=”750″ type=”1/1″ style=”padding: 0px;”][x_video_embed no_container=”false” type=”16:9″][/x_video_embed][/cs_column][/cs_row][/cs_section][/cs_content]

Squealing T200 tips

See Blue Robotics Forum for the entire thread but here is the short version:

We saw odd wear on a T200 thruster prop and found that the grub screw was loose, allowing excessive lateral travel of the prop on its shaft. The telltale signs seem to be squealing or excessive lateral movement.

We learnt that it is a simple process to check for excessive travel or lack of travel and tighten grub screw by removing the rear cap where the power cables attach, locate collar and spin the prop to access the grub screw. The shaft seems well positioned with about 1mm extending beyond the collar.

Blue Robotics said that the setscrew in the shaft collar can loosen over time, and should be checked and re-tightened periodically. A bit of non-permanent threadlock can also help with this, as long as it is applied sparingly and does not interfere with removal of the setscrew for the recommended maintenance. Transportation by ground or plane can introduce vibrations which speed this loosening up. Removing the nosecone on the front of the thruster is the easiest way to access it.

We suggest regularly checking prop shaft lateral travel on your T200s.